Here's the finished joint. Thought it got nice and hot, there isn't much sign of burned flux.
Copyright R. Guggemos
Subscribe to:
Post Comments (Atom)
skip to main |
skip to sidebar
The creation of custom bikes by Cycles Noir
About Me
Smoked Out Alumni - Custom Frame Builders
- Andrew Stewart
- Argonaut Cycles
- Coconino Cycles
- Crumpton Cycles
- Cycles Noir
- Don Walker Cycles
- Dornbox Bicycles
- Edoz Bicycles
- Ellis Cycles
- Engin Cycles
- Foresta Frames
- Gaulzetti Cicli
- Groovy Cycleworks
- Huckleberry Cycles
- Jonathan Greene Cycles
- Kirk Frameworks
- Maietta Cycles
- Maxwell Cycles
- Nash Cycles - Baltimore Bicycle Works
- Peacock Groove Cycles
- Phantasm Cycle Works
- Polytube Cycles
- Progetto Cycles
- Shamrock Cycles
- Signal Cycles
- Spectrum Cycles
- Strong Frames
- Townsend Cycles
- Vendetta Cycles
- Vertigo Cycles
- Villin Cycles
- Vulture Cycles
- Wade Patton Velo
- Winter Bikes
- Yipsan Bicycles
- Zanconato Custom Cycles
Links
Subscribe via email
Subscribe Now: Feed Icon
Blog Archive
-
▼
2005
(173)
-
▼
June
(30)
- New Package
- Fiddling Around
- Thursday, not Wednesday
- Tuesday Night
- Various things
- Finally, pictures
- And now to start aligning the Seat TubeCopyright R...
- Here's the finished joint. Thought it got nice an...
- Pulling the Silver all the way through the jointCo...
- More Silver MasterCopyright R. Guggemos
- Must be some flux in the BBCopyright R. Guggemos
- Starting to Flow SilverCopyright R. Guggemos
- Things are getting HotCopyright R. Guggemos
- Heating the BBCopyright R. Guggemos
- Plenty of Flux inside the joint tooCopyright R. Gu...
- Lots of Flux on the pinned BBCopyright R. Guggemos
- Further Alignment - Prior to setting PinsCopyright...
- Starting to Align the BBCopyright R. Guggemos
- Double Checking Alignment of the finished jointCop...
- More joint cleanupCopyright R. Guggemos
- Polishing the jointCopyright R. Guggemos
- Here's the joint before cleanupCopyright R. Guggemos
- Checking the Alignment of the lower head tube join...
- Who needs a chop saw when the hack saw is so fast?...
- Here's the drawing already covered with stuffCopyr...
- Drawing the Full Scale PlanCopyright R. Guggemos
- Every Shop needs some pumpsCopyright R. Guggemos
- Sarah's FrameCopyright R. Guggemos
- Beginning to Look Like a Frame
- Preparing for the MS150
-
▼
June
(30)
No comments:
Post a Comment